SEMA 2005: Ford unveils GTX1 roadster
Ford at SEMA today officially unveiled its GTX1 roadster, which Leftlane first previewed last week with two sketches. Using the 1966 Sebring-winning Ford GTX1 roadster as his inspiration, Kip Ewing, a Ford Special Vehicle Team engineering supervisor, designed a convertible version of the modern Ford GT. "The Ford GT has been an amazing automotive icon that I've had the pleasure to work on," said Ewing. "The X1 project is a great way to answer the question, 'What if?' and utilize the power of SEMA's members in the aftermarket to get it done."
Ewing had a hard time convincing some top brass at Ford exactly what he hoped to do. "Sometimes people have a hard time understanding what you want to accomplish, but if you can show them a three-dimensional representation, it helps to seal the deal," he said. So Ewing did just that. He took a 1:18 die-cast model of the GT and modified it. "I cut the roof off and then remodeled the body using typical auto body materials like Bondo. Then I repainted it," he said. "It was a nice visual that I could put on someone's desk."
 |
Ewing's craftiness paid off.
In June, Hau Thai-Tang, director of Ford SVT and Advanced Product Creation, gave Ewing the stamp of approval he needed to do bring his dream to life as a SEMA vehicle.
"I've spent my education between engineering and fine arts, but my career path has been engineering," said Ewing. "To be able to get my design work recognized in a show is something I've longed for my whole life."
One of the most innovative aspects of Ewing's GTX1 is its configurable roof. The roof system consists of four individual hard panels. The panels can be configured as a coupe, t-top, or full convertible. Additionally, the panels are painted in the same Valencia Yellow with Tungsten Silver stripes. So, when the car is configured as a coupe, it doesn't lose any of its design appeal. GTX1 drivers won't get caught in the rain because all four panels can be stored inside the vehicle for easy access.
 |
The Genaddi Design Group, a Wisconsin coachbuilder with experience cutting the roofs off of expensive and exotic cars, was chosen to build the car.
"The Ford GTX1 project is a great example of manufacturers working together with the aftermarket to stretch the boundaries and investigate potential design and product innovation," said Thai-Tang.
Ewing says the project became an all-consuming one.
"I was in Wisconsin every other weekend working on the car with the builder," he said. "We finished the construction at a shop I have in my home. In the last week, I've probably had about 16 hours of sleep because I've been so busy finishing the car."
 |
So, how did he feel when the car was finally finished?
"It's very gratifying to see something that was in your head transfer to paper and then transfer to real life," he said. "But to actually get behind the wheel of it and drive your sketch is just a mind-blowing experience."
When asked to predict how he would feel standing beside the GTX1 at the SEMA show this week Ewing replied, "Tired, but very proud.